| 
                     Product Details: 
						                        
 Payment & Shipping Terms: 
							
  | 
                            
| IP Protection Class: | IP20 | Maximum Working Altitude: | 3000m | 
|---|---|---|---|
| Storage Temperature: | -40~80℃ | ||
| Highlight: | Bragg Grating Wind Measurement Mast,Wind Measurement Mast OEM ODM,Sensor Type Fiber meteorological mast | 
			    	||
Sensor type Fiber Bragg Grating Wind Measurement Mast
1,Product introduction
Pay attention to the use of ergo1665 glue, the whole process from glueing to pasting should not exceed 3 minutes, otherwise the ergo glue will solidify. At the same time, the internal surface temperature of the blade is between 10 and 40 °C.
2,Features
① Simple installation and easy maintenance
② High precision
③ Flexible and portable
④ Data is safe and reliable
3,Application field
① Blade root load measurement
② Independent pitch
③ Blade derating
④ Fatigue monitoring
⑤ Fan control
4,Performance Parameter
| 
			 IP protection class  | 
			
			 IP20  | 
		
| 
			 Maximum working altitude  | 
			
			 3000m  | 
		
| 
			 Operating temperature  | 
			
			 -20~60℃  | 
		
| 
			 Storage temperature  | 
			
			 -40~80℃  | 
		
| 
			 Environment humidity  | 
			
			 -180°~180°  | 
		
| 
			 Wind speed accuracy  | 
			
			 5%~9RH5%  | 
		
| 
			 Powered by  | 
			
			 22-26VDC  | 
		
| 
			 Power consumption  | 
			
			 <15W  | 
		
| 
			 IP protection class  | 
			
			 IP67  | 
		
| 
			 Maximum working altitude  | 
			
			 3000m  | 
		
| 
			 Operating temperature  | 
			
			 -40~50℃  | 
		
| 
			 Storage temperature  | 
			-40~80℃ | 
| 
			 Environment humidity  | 
			
			 0~95%RH  | 
		
| 
			 Sensor type  | 
			
			 Fiber Bragg Grating  | 
		
| 
			 Measuring range  | 
			
			 ±1500με  | 
		
| 
			 Grating reflectivity  | 
			
			 -0.5g~0.5g  | 
		
| 
			 IP protection level  | 
			
			 50%~90%  | 
		
5,External interface of demodulator
LAN: network interface, which can be used for the connection of the device network; the network cable can be connected to the computer, and the device parameter setting, status observation and data transmission can be performed through the device client software.
CANopen: CAN interface, which transmits data externally through the CANopen protocol.
POWER: Power interface, which supplies power to the whole device.
1-16: Sensor interface, used to connect with different fiber grating sensors (the number of channels is customized according to customer requirements).
FIELDBUS: DB9 interface, supports external data transmission through Profibus, RS485, etc.
![]()
Contact Person: ivyyao
Tel: +86 13072523225
Fax: 86-025-86800073